Only for 6 dof fanuc robots. More...

#include <FanucDriver.hpp>

Inherits Fanuc.

Public Member Functions
	FanucDriver (std::string ipNr, int updateRate)
	construct object More...

virtual	~FanucDriver ()
	destruct object

virtual void	setGlobalSpeed (int speed)
	sets the speed in percentage of the maximum speed. More...

virtual int	getGlobalSpeed ()
	gets the speed in percentage of the maximum speed. More...

virtual void	moveFineQ (rw::math::Q const &q)
	sends a move FINE command to the fanuc controller. The FINE command moves to the given Q and stops. More...

virtual void	moveCntQ (rw::math::Q const &q)
	sends a move CNT command to the fanuc controller. The CNT command moves toward the given Q and blends toward the next move command if any is given before q is reached. More...

virtual bool	isMoveComplete ()
	queries if the last move instuction is completed. Notice that the CNT move instruction completes before reaching the goal configuration. More...

virtual void	setCntQSpeed (int speed)
	sets the speed of the moveCntQ instruction in percentage of the globalspeed. More...

virtual void	setFineQSpeed (int speed)
	sets the speed of the moveFineQ instruction in percentage of the globalspeed. More...

virtual void	setCntQAcc (int acc)
	sets the acceleration override of the moveCntQ instruction in percentage of "normal" acceleration were normal is 100%. More...

virtual void	setFineQAcc (int acc)
	sets the acceleration override of the moveFineQ instruction in percentage of "normal" acceleration were normal is 100%. More...

virtual rw::math::Q	getQ ()
	gets the joint configuration of the robot. The configuration is only updated by calls to the update function. More...

virtual rw::math::Q	getdQ ()
	gets the joint configuration of the robot. The configuration is only updated by calls to the update function. More...

virtual void	update ()
	updates all internal registers and transmits commands to the robot controller. More...

virtual bool	connect ()
	connects to the robot controller More...

virtual bool	isConnected ()
	returns if connected to fanuc controller More...

virtual void	disconnect ()
	disconnects from the robot controller More...

virtual void	callRobotProgram (unsigned int progNr)
	calls a program on the robot controller. More...

virtual void	setCallArguments (float arg1, float arg2, float arg3)
	disconnects from the robot controller More...

virtual bool	isCallFinished ()
	checks if a call to a robot program on the controller is finished More...

bool	notifyProgram ()
	notifies the robot controller by setting the notify register to 1.0 More...

bool	isCallWaiting ()
	checks if the robot controller is waiting for a notify. More...

float	getLastError ()
	check last occored error More...

void	resetError ()
	resets the error status

rw::math::Q	getPos ()

Public Member Functions inherited from Fanuc
virtual	~Fanuc ()
	destruct object

Detailed Description

Only for 6 dof fanuc robots.

Constructor & Destructor Documentation

◆ FanucDriver()

FanucDriver	(	std::string	ipNr,
		int	updateRate
	)

construct object

Parameters

ipNr	[in] IP address of the robot controller
updateRate	[in] the rate at which the controller recieves data.

Member Function Documentation

◆ callRobotProgram()

virtual void callRobotProgram ( unsigned int progNr )

virtual

calls a program on the robot controller.

Implements Fanuc.

◆ connect()

virtual bool connect ( )

virtual

connects to the robot controller

Returns: true if connect is succesfull, false otherwise

Implements Fanuc.

◆ disconnect()

virtual void disconnect ( )

virtual

disconnects from the robot controller

Implements Fanuc.

◆ getdQ()

virtual rw::math::Q getdQ ( )

virtual

gets the joint configuration of the robot. The configuration is only updated by calls to the update function.

Returns: the current joint configuration.

Implements Fanuc.

◆ getGlobalSpeed()

virtual int getGlobalSpeed ( )

virtual

gets the speed in percentage of the maximum speed.

The speed is always in the interval [0;100]

Implements Fanuc.

◆ getLastError()

float getLastError ( )

inlinevirtual

check last occored error

Returns: error code of last returned error

Implements Fanuc.

◆ getQ()

virtual rw::math::Q getQ ( )

virtual

gets the joint configuration of the robot. The configuration is only updated by calls to the update function.

Returns: the current joint configuration.

Implements Fanuc.

◆ isCallFinished()

virtual bool isCallFinished ( )

virtual

checks if a call to a robot program on the controller is finished

Implements Fanuc.

◆ isCallWaiting()

bool isCallWaiting ( )

virtual

checks if the robot controller is waiting for a notify.

Returns: true if robot controller is waiting for notify false otherwise

Implements Fanuc.

◆ isConnected()

virtual bool isConnected ( )

virtual

returns if connected to fanuc controller

Returns: true if connected, false otherwise

Implements Fanuc.

◆ isMoveComplete()

virtual bool isMoveComplete ( )

virtual

queries if the last move instuction is completed. Notice that the CNT move instruction completes before reaching the goal configuration.

Returns: true if last move instruction is complete false otherwise.

Implements Fanuc.

◆ moveCntQ()

virtual void moveCntQ ( rw::math::Q const & q )

virtual

sends a move CNT command to the fanuc controller. The CNT command moves toward the given Q and blends toward the next move command if any is given before q is reached.

Parameters

q	[in] The joint configuration to move to.

Implements Fanuc.

◆ moveFineQ()

virtual void moveFineQ ( rw::math::Q const & q )

virtual

sends a move FINE command to the fanuc controller. The FINE command moves to the given Q and stops.

Parameters

q	[in] The joint configuration to move to.

Implements Fanuc.

◆ notifyProgram()

bool notifyProgram ( )

virtual

notifies the robot controller by setting the notify register to 1.0

Returns: true if notify is posible, false otherwise.

Note: that the notification will happen at the next update

Implements Fanuc.

◆ setCallArguments()

virtual void setCallArguments	(	float	arg1,
		float	arg2,
		float	arg3
	)

virtual

disconnects from the robot controller

Implements Fanuc.

◆ setCntQAcc()

virtual void setCntQAcc ( int acc )

virtual

sets the acceleration override of the moveCntQ instruction in percentage of "normal" acceleration were normal is 100%.

Parameters

acc	[in] the acceleration overide in percent ]0;500]

Implements Fanuc.

◆ setCntQSpeed()

virtual void setCntQSpeed ( int speed )

virtual

sets the speed of the moveCntQ instruction in percentage of the globalspeed.

Parameters

speed [in] the speed in percent ]0;100]

Implements Fanuc.

◆ setFineQAcc()

virtual void setFineQAcc ( int acc )

virtual

sets the acceleration override of the moveFineQ instruction in percentage of "normal" acceleration were normal is 100%.

Parameters

acc	[in] the acceleration overide in percent ]0;500]

Implements Fanuc.

◆ setFineQSpeed()

virtual void setFineQSpeed ( int speed )

virtual

sets the speed of the moveFineQ instruction in percentage of the globalspeed.

Parameters

speed [in] the speed in percent ]0;100]

Implements Fanuc.

◆ setGlobalSpeed()

virtual void setGlobalSpeed ( int speed )

virtual

sets the speed in percentage of the maximum speed.

The speed can be set in the interval [0;100]

Implements Fanuc.

◆ update()

virtual void update ( )

virtual

updates all internal registers and transmits commands to the robot controller.

Implements Fanuc.

The documentation for this class was generated from the following file:

FanucDriver.hpp

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ FanucDriver()

Member Function Documentation

◆ callRobotProgram()

◆ connect()

◆ disconnect()

◆ getdQ()

◆ getGlobalSpeed()

◆ getLastError()

◆ getQ()

◆ isCallFinished()

◆ isCallWaiting()

◆ isConnected()

◆ isMoveComplete()

◆ moveCntQ()

◆ moveFineQ()

◆ notifyProgram()

◆ setCallArguments()

◆ setCntQAcc()

◆ setCntQSpeed()

◆ setFineQAcc()

◆ setFineQSpeed()

◆ setGlobalSpeed()

◆ update()